Resin Planter Molds: Make a Square Tube Planter in Simple Steps
Welcome to our DIY tutorial! Today, we’ll be making a beautiful square tube planter using the Square Tube Planter Resin Silicone Mold from Just Kraft. This project is perfect for both beginners and seasoned crafters who are interested in exploring the world of planter moulds and creating unique home decor. With the right materials and a bit of creativity, you can craft stunning planters that not only serve as functional plant holders but also as eye-catching decorative pieces. Whether you're looking for large concrete planter molds for sale or silicone planter molds, this tutorial will guide you through the process of making your own planter mold concrete masterpiece. Let’s get started!
What You Will Need
To complete this project, you’ll need the following materials:
Square Tube Planter Resin Silicone Mold - The star of our project! You can find it here.
Resin - Choose a high-quality epoxy resin for a clear finish. Check out our selection on Just Kraft.
Mixing Cups - For measuring and mixing your resin.Resin Silicone Measuring Cup | 250ml Resin Silicone Measuring Cup | 100ml
Stir Sticks - To mix the resin thoroughly.Plastic Stirrer Stick 6 Inch - Pack of 12
Color Pigments - Optional, but you can add color to your resin for a unique look. Browse our pigments here.
Gloves - Protect your hands while working with resin.
Decorative Elements - Think flowers, stones, or anything else you’d like to include in your planter. Browse our Wide variety of Resin Art Supplies here.
Step-by-Step Instructions
Step 1: Prepare Your Workspace
Make sure you’re working in a well-ventilated area. Lay down some newspaper or a plastic sheet to protect your surfaces.
Step 2: Prepare the Mold
Spray the inside of the square tube planter mold with mold release spray to make it easier to remove the finished product later.
Step 3: Mix the Resin
Follow the instructions on your resin packaging to mix the resin in your mixing cups. Make sure to wear gloves during this process.
Step 4: Add Color (Optional)
If you want to add color to your planter, now is the time to mix in your colorpigments. Stir well to ensure an even color throughout the resin.
Step 5: Pour the Resin into the Mold
Carefully pour the mixed resin into the prepared mold, filling it to the desired level. You can add decorative elements at this stage if you like.
Step 6: Let It Cure
Allow the resin to cure according to the manufacturer’s instructions. This usually takes 24-48 hours.
Step 7: Remove the Planter from the Mold
Once the resin is fully cured, carefully remove the planter from the mold. If you used mold release spray, this should be easy.
Step 8: Insert the Test Tube
Insert the Test tube in the slot provided. Add water and nutrients based on the plant that you have chosen. Finally place your plant in the tube.
Step 9: Finishing Touches
If there are any rough edges, you can sand them down for a smoother finish. Now your planter is ready to use!
Conclusion
Creating your own square tube planter is a fun and rewarding DIY project. With just a few materials and some creativity, you can make a beautiful addition to your home or garden. Don't forget to explore other options like concrete pot moulds, planter pot molds, and flower pot making moulds available at Just Kraft to get started on your next DIY adventure! Whether you’re interested in planter silicone mould or any other type of planter mold, the possibilities are endless!
