Cloud Candle Dish Silicone Mould | Design 2 | 2 Piece Set - Resin

Cast a soft cloud dish that sits a tealight in the middle with room around it for dried flowers or crystals. Design 2 is a 2 piece set of white silicone cloud moulds with a longer outline, one plain dish and one with an inner divider. Pour resin, cement or plaster; no size is stated for this set.

Specifications

Perfect for

• Tealight trays with dried flowers
• Crystal and trinket trays
• Nursery and kids room decor
• Birthday return gifts

Compatibility

Works with: epoxy resin, plaster of Paris, cement, jesmonite, candle wax and melt and pour soap base.

Pairs well with: mica powder, dried flowers and tealights in their own metal cups.

Not suitable for: food or oven use, since we state no food grade or heat rating for this mould; a bare flame on a resin cast, so keep each tealight in its cup.

How to Use

1. Wash and dry the mould, then set it level on a flat board.
2. Mix your resin, cement or plaster as its maker directs and pour slowly, tapping the sides to lift bubbles.
3. Leave it to cure fully for the time the maker states; an early release tears edges.
4. Flex the silicone back from one side and lift the piece out.

Before You Buy

• Mould only; resin, cement, wax and pigment are sold separately.
• The mould is white silicone; coloured pieces in the photos are example casts.
• No size is stated for this set, so we cannot quote a cast size.
• The Cloud Candle Dish set Design 1 is 14x11cm with a compact three lobe outline; this Design 2 is longer.

You will Need

• epoxy resin and hardener
• casting and moulding powder

You may also like

• tealight candle holders
• mica powder
• candle making studio

Frequently Asked Questions

Does Design 2 come as two moulds?
Yes. It is a 2 piece set: one plain cloud dish and one with an inner divider.

How is Design 2 different from Design 1?
Design 2 has a longer cloud outline and no stated size. Design 1 is 14x11cm and more compact.

Can I cast cement and jesmonite in it as well as resin?
Yes. It is listed for resin, plaster, cement, jesmonite, wax and soap base; seal cement before wax touches it.

Mould or a ready made tealight holder, which should I pick?
A ready made metal or glass holder works straight away. This mould casts as many holders as you like in your own colours after a full cure. Pick the mould for batches, a ready holder for one piece now.