Epoxy Resin & Hardener 2:1 750g - Ultra Clear Bubble Free Art Kit

Ultra Clear Epoxy Resin and Hardener 2:1 Ratio 750g Kit for Resin Art, Casting, and Coating

This JustKraft ultra clear epoxy resin kit gives you everything to start pouring: 500g of resin and 250g of hardener in a precise 2:1 ratio, measured by weight. It cures crystal clear with a high-gloss, glass-like finish, self-levels for a smooth even surface, and resists yellowing so your work stays clear over time. The 2:1 mix cures to a durable yet slightly flexible finish (60-70 Shore A), which suits resin art, coasters, tabletops, river tables, and coating work.

Key Features

• Precise 2:1 ratio by weight: 500g resin plus 250g hardener, so mixing is simple and consistent
• Crystal clear, high-gloss finish that cures to a glass-like shine and resists yellowing over time
• Self-leveling and bubble-free formula that flows flat for a smooth, even surface with minimal effort
• About 45 minutes of working time and a full cure in 8 to 12 hours, so projects move along quickly
• Cured hardness 60-70 Shore A, giving a soft, flexible finish suited to its ratio

Where You Can Use This

• Resin art, abstract pours, geode art, and ocean-themed pieces
• Coasters, trays, bowls, and decorative castings
• Tabletops, river tables, and wood coating
• Jewellery, pendants, keychains, and small cast pieces
• Sealing and coating paintings, photos, and craft surfaces

How to Use

• Measure by weight in a 2:1 ratio: 500g resin to 250g hardener for this pack
• Work between 25 and 45 degrees Celsius for the best flow and cure
• Stir slowly for three to five minutes, scraping the sides, to avoid whipping in air
• Let the mix rest a few minutes so bubbles rise, then pour
• Pass a heat gun or torch lightly over the surface to pop any surface bubbles
• Leave to cure undisturbed; touch-dry in a few hours, full cure in 8 to 12 hours

Why Choose JustKraft

JustKraft ultra clear resin is built for reliable, repeatable results, the same clarity, the same cure, pour after pour. For artists who sell their work or take on commissions, that consistency means fewer failed pours and a finish your customers can count on.

Complete Your Setup

Pair this resin kit with silicone molds, mixing cups, stir sticks, and a heat gun or bubble remover spray to pop bubbles. Add mica powders, chameleon pigments, or opaque pigment pastes to color your pours, and finish cured pieces with resin polish for an extra-glossy shine.

Frequently Asked Questions

Q: What is the mixing ratio and how do I measure it?
A: This is a 2:1 ratio kit measured by weight, 500g resin to 250g hardener for this pack. Always weigh on a scale rather than measuring by volume for an accurate cure.

Q: How long does it take to cure?
A: You get around 45 minutes of working time, and the resin reaches a full cure in 8 to 12 hours at a working temperature of 25 to 45 degrees Celsius.

Q: Will it turn yellow over time?
A: No. The formula is made to resist yellowing, so cured pieces stay clear and glossy. Keeping work out of constant direct sunlight helps preserve clarity further.

Q: What is the difference between the 2:1 and 3:1 versions?
A: The 2:1 cures slightly flexible (60-70 Shore A) and suits art, coasters, and coating. The 3:1 cures harder (80-90 Shore) and suits jewellery, keychains, and pieces needing a rigid, sharp-edged finish.

Q: Is one pack enough for my project?
A: This 750g pack covers small to medium work. For large river tables or deep pours, choose a bigger pack or pour in layers to manage heat build-up.