Epoxy Resin and Hardener | 2:1 | 750g | Ultra Clear - Coasters

Pour clear, glossy resin art with this 750g epoxy resin and hardener set, mixed 2:1 by weight (500g resin and 250g hardener). The label gives a 45 minute pot life at 25°C, a full cure in 8 to 12 hours and a self levelling, high gloss finish. The 750g set covers several coasters or a small tray.

Specifications

Perfect for

• Coasters and small trays
• Flower and memory keepsakes
• Keychains and pendants
• Geode and ocean pours

Compatibility

Works with: silicone moulds, sealed wood, MDF, canvas, resin pigments, mica powder, alcohol ink and fully dried flowers.

Pairs well with: mica powder, alcohol inks and silicone moulds.

Not suitable for: very deep single pours; use a deep casting resin for thick river table layers.

How to Use

1. Weigh 2 parts resin (A) to 1 part hardener (B); measure by weight, not volume.
2. Stir slowly for 3 to 5 minutes, scraping the sides and base.
3. Pour on a clean, dry, level surface or into moulds within the 45 minute pot life.
4. Pop surface bubbles with a heat gun or torch.
5. Leave undisturbed for 12 to 24 hours for best results, as the label advises.

Before You Buy

• Work in a ventilated space and wear gloves, as the label advises.
• We state no food grade rating for this resin, so do not use cured pieces for food contact.
• The label gives a cured hardness of 60 to 70 Shore A.
• Near twin: the 750g coating resin uses the same label photos but is sold for brushed or rolled surface coats, not pours.

You will Need

• Mixing cups, sticks and a digital scale

You may also like

• Tray moulds
• Dried flowers
• Resin coaster moulds

Frequently Asked Questions

How much resin is in the 750g set?
500g of resin and 250g of hardener, mixed 2:1 by weight.

Is 750g enough, or should I buy 300g?
This set is 750g (500g resin and 250g hardener) and covers several coasters or a small tray. The 300g set suits a few coasters or keychains.

Can I colour this resin or set flowers in it?
Yes. It works with resin pigments, mica powder, alcohol ink and fully dried flowers in silicone moulds; add colourants in small amounts.

Should I use this epoxy resin or UV resin?
This epoxy is mixed from two parts and cures in 8 to 12 hours, so it suits coasters, trays and larger pours. UV resin is one part that sets under a UV lamp, so it suits small, thin pieces such as pendants.