Epoxy Resin and Hardener | 3:1 | 1.33kg | Hard Cure - Jewellery

Cast hard, clear jewellery and small pieces with this 1.33kg epoxy resin and hardener set, mixed 3:1 by weight (997g resin and 333g hardener). The label gives a 45 minute pot life at 25°C, a full cure in 24 to 48 hours and a cured hardness of 80 to 90 Shore A. The 1.33kg set gives jewellery makers and small sellers a bigger supply.

Specifications

Perfect for

• Pendants, earrings and keychains
• Small castings with sharp edges
• Bookmarks and name tags
• Coasters that need a hard finish

Compatibility

Works with: silicone moulds, sealed wood, MDF, canvas, resin pigments, mica powder, alcohol ink and fully dried flowers.

Pairs well with: jewellery moulds, mica powder and bezels.

Not suitable for: very deep single pours; use a deep casting resin for thick layers.

How to Use

1. Weigh 3 parts resin (A) to 1 part hardener (B); measure by weight, not volume.
2. Stir slowly for 5 to 7 minutes, scraping the sides and base.
3. Pour into clean, dry moulds within the 45 minute pot life.
4. Pop surface bubbles with a heat gun or torch.
5. Leave undisturbed for 24 to 48 hours before demoulding, as the label advises.

Before You Buy

• Work in a ventilated space and wear gloves, as the label advises.
• We state no food grade rating for this resin, so do not use cured pieces for food contact.
• Near twin: the 2:1 epoxy resin cures in 8 to 12 hours to 60 to 70 Shore A and suits coasters and trays; this 3:1 resin cures harder for jewellery.

You will Need

• Mixing cups, sticks and a digital scale

You may also like

• Resin jewellery moulds
• Bezels for resin art
• Keychain blanks

Frequently Asked Questions

What is in the 1.33kg set?
997g of resin and 333g of hardener, mixed 3:1 by weight.

Should I pick 1.33kg or 665g?
This set is 1.33kg (997g resin and 333g hardener). The 665g set holds about half as much, for a first batch of jewellery.

Can I colour this resin or set flowers in it?
Yes. It works with resin pigments, mica powder, alcohol ink and fully dried flowers in silicone moulds; add colourants in small amounts.

Should I use this epoxy resin or UV resin?
This epoxy is mixed from two parts and cures in 24 to 48 hours, so it suits coasters, trays and larger pours. UV resin is one part that sets under a UV lamp, so it suits small, thin pieces such as pendants.