HSS Twist Drill Bits | 0.8 to 3mm | Pack of 10 - Micro Drill Set for Resin

Keep spare fine bits on hand so a snapped one does not stop the job. This pack of 10 HSS twist drill bits runs from 0.8 to 3mm, as printed on the case, in a clear plastic box with a hanging tab.

The bits come on their own, ready to fit a pin vice, hand drill or rotary tool.

Specifications

Perfect for

• Spare bits for a pin vice or mini drill
• Hanging holes in resin keychains
• Holes for screw eye pins in wood
• Larger 2.5 to 3mm holes for cords

Compatibility

Works with: a pin vice, a mini hand drill, a USB mini drill or a rotary tool with a matching chuck.

Pairs well with: a mini hand drill and screw eye pins.

Not suitable for: masonry, glass and hardened metal.

How to Use

1. Fit the bit square in the chuck and tighten it.
2. Start slowly so the bit does not skate.
3. Back the bit out to clear dust as you go.

Before You Buy

• The bits are supplied without a drill or handle.
• The largest bits may not fit a small pin vice chuck.

You will Need

• hand drills and jewellery tools

You may also like

• UV resin
• keychain charms

Frequently Asked Questions

Which sizes are in the pack?
The pack of 10 runs from 0.8 to 3mm: 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.5, 2.8 and 3.0mm, as printed on the case.

Do they come with a drill?
No. The bits are sold on their own and need a pin vice, hand drill or rotary tool.

Will they fit my hand drill?
Most pin vices take bits up to about 2mm, so check your chuck before using the 2.2 to 3mm bits.

Loose bits or a hand drill set?
Buy these if you already own a drill and want spares up to 3mm. Buy a hand drill set if you have no tool yet.