JAGS UV Resin Hard | 10ml | Casting & Coating - Crystal Clear UV Resin

Cast and coat small pieces with this 10ml JAGS UV Resin Hard. The label gives 30 to 90 seconds under a 6W to 9W UV LED, 2 to 4 minutes under a 36W UV lamp and 20 to 40 minutes in cloudy sunlight, and it self levels for a smooth, glossy finish. The 10ml bottle has a dropper cap for fine work.

Specifications

Ideal For

• Jewellery and keychain makers
• Beginners in resin
• Resin painting and glitter work

Perfect for

• Glitter and sequin pieces
• Jewellery and pendants
• Keychains and coasters
• Resin painting and small repairs

Compatibility

Works with: glitter, sequins, open bezels, small moulds and dried flowers.

Pairs well with: a UV lamp and UV resin tape.

Not suitable for: thick castings; use two part epoxy resin for deep pours.

How to Use

1. Apply a thin layer into the mould or bezel.
2. Add glitter or inclusions.
3. Cure under a UV LED or lamp, both sides for moulds.
4. Add layers and cure again for depth.

You'll Need

• a UV lamp or torch

You may also like

• open bezels
• glitter powder

Before You Buy

• Use gloves and keep away from children, as the label advises.
• We state no food or skin safety rating for this resin.

Frequently Asked Questions

How fast does JAGS UV resin cure?
30 to 90 seconds under a 6W to 9W UV LED, or 2 to 4 minutes under a 36W lamp, as printed.

What can I use it for?
The label lists glitter and sequin work, resin painting, jewellery, keychains, pendants and coasters.

How is it different from epoxy resin?
UV resin needs no mixing and cures in minutes under UV light; epoxy needs hardener and hours to cure.