Resin Ring Bezel | Adjustable | 12mm Round Cup | Silver | Pack of 1 - Ring Base

Make a finished resin ring at home with no soldering. This silver tone adjustable ring base carries a round cup 12mm (0.5 inch) inside, with a solid base and a raised rim, so you pour resin straight in, press clay into it or glue a cabochon down with no taping. The open band measures 17.5mm (0.7 inch) across on the maker's size panel and bends by hand to fit most fingers.

Specifications

Perfect for

• Resin rings poured and cured at home
• Dried flower and glitter domes
• Cabochon and flatback stone settings, glued in with jewellery glue
• Statement rings with a full flower dome
• Polymer and air dry clay rings

Compatibility

Works with: UV resin, epoxy resin, polymer clay, air dry clay, dried and pressed flowers, glitter, mica powder and any flat backed cabochon that fits inside 12mm.

Pairs well with: matching bracelet bezels for a set.

Not suitable for: oven baking, because no heat rating is given for the plating. Bake polymer clay separately and glue it in once cool.

How to Use

1. Wipe the cup clean so nothing sits under your fill.
2. Pour a thin first layer of resin, press in clay, or spread glue across the base for a cabochon.
3. Place flowers, glitter or foil into the wet layer.
4. Top up to just above the rim so the resin domes, then cure fully.
5. Bend the open band gently by hand to fit the finger.

Before You Buy

• The size given is the inside of the cup, so match your stone or fill to 12mm.
• Resin, clay, stones and fillers are not included. This is the ring base only.
• No plating thickness, metal alloy or nickel rating is stated by the supplier, so we state none.
• Near twin: the gold 12mm ring bezel is the same cup size in gold tone.

You will Need

• UV resin
• dried flowers

You may also like

• mica powder
• bracelet bezels
• open bezels

Frequently Asked Questions

What size is the cup?
The round cup is 12mm (0.5 inch) inside, with a solid base and a raised rim, so resin stays put with no taping.

How is this different from the other sizes and shapes?
This silver cup is 12mm inside, the widest round. The silver 6mm round is half the width.

Will it fit my finger, and can I use UV resin?
The band is open and adjustable, so you bend it to size by hand. UV resin, epoxy resin and clay all work in the cup.

Should I pick a ring bezel or an open bezel?
A ring bezel has a closed cup with a solid base, so you pour straight in, which suits beginners. An open bezel has an open window that needs backing tape before you pour, which suits makers who want light to pass through the resin.