Round Table Top & Tray Mould | 16 Inch | 15mm Deep | Pack of 1 - Resin

Cast large round resin pieces for tables and wall art with this round table top & tray mould. The mould casts a round table top or large tray (16 Inch, 15mm deep). It is made of flexible white silicone that bends away from the cured piece and works with epoxy resin. Large moulds need a level table and a slow, steady pour; plan your resin quantity before you start, as a thick pour this size can use a lot of resin.

Specifications

Ideal For

• Experienced resin artists
• Furniture and decor makers
• Small businesses taking commission orders

Perfect For

• Round side table and coffee table tops
• Large wall art and clock backgrounds
• Statement trays and platters for display
• Commission and small business resin pieces

Compatibility

Works with: epoxy resin.

Pairs well with: mica powder, alcohol ink, gilding flakes and foil and stones for resin art.

Not suitable for: UV resin, which cannot cure a layer this thick, or a thin coating resin poured deep in one go.

How to Use

1. Place the mould on a flat, level surface and check it is clean and dry.
2. Mix your resin and hardener in the ratio your resin maker gives, stirring slowly to limit bubbles.
3. Add pigment, mica or inclusions if you like, then pour to the rim of each cavity.
4. Pop surface bubbles gently and cover to keep dust off.
5. Leave to cure for the full time your resin maker states.
6. Flex the silicone away from the edges and ease the piece out.

You'll Need

• epoxy resin and hardener
• resin tools

You May Also Like

• round moulds
• tray moulds
• alcohol ink

Before You Buy

• Resin, pigments and tools are sold separately.
• We state no food grade rating for this mould, so use it for resin and craft work rather than for food.
• The photo is shared across sizes in this range, so go by the size listed on this page.
• Thick pours need a deep pour resin; a thin coating resin poured this deep can heat up, crack or yellow.

Frequently Asked Questions

What size is the round table top & tray mould?
The size is 16 Inch, and the depth or thickness is 15mm.

How is this different from the other sizes in the range?
This one is 16 Inch, 15mm deep. The range also includes the 24 Inch, 30mm deep round table top & board mould, the 18 Inch, 30mm deep round table top & tray mould and the 18 Inch, 20mm deep round table top & tray mould, so pick the one that suits your project.

Can I use UV resin in this mould?
No. UV light cannot cure a layer this thick. Use a deep pour epoxy resin and follow its maker's layer and cure guidance.

How do I clean and store the mould?
Wash it with mild soap and water, dry it fully, and store it flat away from sharp objects and direct sunlight.