Shooting Star Mosaic Art MDF Base | 12 Inch | 6.6mm Thick - DIY Mosaic

Turn loose mosaic tiles into finished wall decor without cutting a base yourself. This shooting star base is 12 Inch (30.5cm) across and 6.6mm thick MDF, with guide lines engraved into the surface so you know where each colour goes. Good for a kids room or a study wall. A good pick for a space design.

Specifications

Perfect for

• Tiled wall art for a kids room
• Gold or yellow tiles on the star and a tail graded from warm to cool
• A first mosaic project for beginners
• Handmade gifts and party decor

Compatibility

Works with: glass mosaic tiles, ceramic tiles, mirror pieces, acrylic colours, craft adhesive and grout.

Pairs well with: square glass mosaic tiles, white grout and a strong craft adhesive.

Not suitable for: outdoor or bathroom use, since raw MDF swells with moisture unless sealed, and any food contact.

How to Use

1. Seal the clean base with primer or diluted white glue.
2. Lay the tiles out dry inside the engraved lines so you can adjust them first.
3. Glue the tiles one section at a time, leaving a small even gap.
4. Let the adhesive cure fully before you grout.
5. Push grout into the gaps, wipe the tile faces with a damp cloth and let it set.

Before You Buy

• This is the bare MDF base only. Tiles, adhesive, grout and hanging hardware are sold separately.
• The raw MDF has a natural brown tone and a light surface texture.
• The same shooting star design also comes as an 8 inch base; this one is the larger 12 Inch (30.5cm) size.

You will Need

• mosaic tiles
• craft adhesive and glue

You may also like

• mosaic art MDF bases
• MDF boards and bases
• acrylic colours

Frequently Asked Questions

What size is this mosaic base?
It is 12 Inch (30.5cm) across at its widest point and 6.6mm thick.

How is the 12 inch base different from the 8 inch one?
This one is 12 Inch (30.5cm), the smaller one is 8 inch. The design and the 6.6mm thickness are the same, so the 12 inch base takes more tiles and makes a bigger piece.

Which tiles work on this base?
Glass mosaic tiles, ceramic tiles and mirror pieces all work; small squares fit the engraved lines most easily.

Should I pick this mosaic base or a plain MDF board?
This base has the design engraved as guide lines, so a beginner knows where each colour goes. A plain MDF board is a blank surface, better if you want to draw your own design.