Silent Sweep Clock Movement Machine - 12mm Spindle - For up to 3mm Boards

12mm spindle clock movement machine for boards up to about 3mm

This quartz clock movement machine has a 12mm spindle (total shaft) and a smooth, silent sweep (no ticking). The threaded shaft passes through a clock board up to about 3mm thick, leaving room for the nut. It takes hands with a hour hole 5.1mm and an oblong minute (3.3mm), the body measures 5.5 x 5.5 x 1.5 cm, and it runs on one AA battery (not included). Ideal for building DIY resin, MDF and wood wall clocks, or replacing a worn movement.

Key Features

• 12mm spindle, fits boards up to about 3mm thick
• Silent sweep, smooth and noise-free
• Takes hands with a 5.1mm hour hole and oblong minute; runs on one AA battery
• Compact 5.5 x 5.5 x 1.5 cm body for easy DIY install

Where You Can Use This

• DIY resin and epoxy wall clocks
• MDF, wood and craft clocks
• Cross-stitch and frameless clocks
• Replacing a worn clock movement

Why Choose JustKraft

JustKraft supplies craft-ready clock parts with accurate specs and reliable fit, backed by fast shipping across India.

Pro Tips

Measure your board first: the threaded shaft must pass through it and still protrude about 1-2mm at the front to take the washer and nut. This 12mm spindle suits boards up to about 3mm; for a thicker board, recess the back or use a wall mounting box, or step up to a longer spindle. Fit the hour hand first, then minute, then second. For a minute hand over about 150mm, use a high-torque movement.

Complete Your Setup

Pair this with matching clock hands (5mm hour hole), a clock dial or resin clock mould, clock numerals, and a hanging hook to build the whole clock in one order and save on shipping.

Frequently Asked Questions

Q: What board thickness does it fit?
A: Boards up to about 3mm thick, so the shaft still protrudes for the nut. Measure your board (dial plus any backing) before choosing.

Q: Does it tick or is it silent?
A: It is a silent sweep movement with smooth, noise-free motion.

Q: What is included, and which hands fit?
A: The movement with mounting washers and nut (hands and battery are not included). It takes hands with a 5.1mm hour hole and an oblong minute.

Q: What battery does it use?
A: One AA battery (not included). Avoid rechargeable or alkaline-only types if the pack advises against them.