Silicone Mould Making Kit | 1:1 | 1kg - Resin and Candle Moulds

Start making custom moulds with this 1kg silicone mould making kit. It comes as two bottles of milky white liquid silicone rubber, Part A 500g and Part B 500g as printed, that you mix 1:1 and pour over a model.

Specifications

Perfect for

• Copying keepsakes and figurines
• Custom resin and candle moulds
• Murti and plaster casting moulds
• Concrete planter moulds

Compatibility

Works with: resin, wax, soap, plaster, gypsum and concrete casting.

Pairs well with: mould release spray and mixing cups.

Not suitable for: food moulds; we state no food grade rating for this silicone, so use it for soap, wax, resin and plaster.

How to Use

1. Weigh Part A and Part B in equal amounts, 1:1 by weight.
2. Mix slowly, scraping the sides and bottom of the cup.
3. Pour in a thin, steady stream over your model in a mould box.
4. Leave to cure fully, as the bottle label says, before demoulding.

Before You Buy

• The bottles print no cure time in our photos; follow the label on the pack you receive.
• Near twin: the JAGS 1kg platinum grade silicone also mixes 1:1 and prints a 30 minute working time and about 6 hour cure.

You will Need

• Mixing cups and a digital scale

You may also like

• Casting powder
• Epoxy resin
• Candle making studio

Frequently Asked Questions

What is in the kit?
One bottle of Part A (500g) and one bottle of Part B (500g) liquid silicone rubber.

How is it different from the 500g silicone rubber?
This kit is 1kg (500g of each part); the 500g pack holds 250g of each part for a few small moulds.

Can I pour resin or wax into the finished mould?
Yes, it suits resin, wax, soap, plaster, gypsum and concrete casting.

Should I use silicone rubber or liquid latex?
Silicone rubber is poured from two parts and gives strong, detailed moulds. Liquid latex is brushed on in layers and peels off once dry, so it suits simple, quick moulds and masking.