Square Acrylic Clock Base | White | 12 Inch | 3mm Thick | Pack of 1 - DIY Clock

Start a crisp, modern clock on this square white acrylic base. It is 12 inch square and 3mm thick, with a centre hole for a 12mm spindle movement and a protective film on the surface.

Specifications

Perfect for

• Alcohol ink and fluid art clocks
• Vinyl letter and quote clocks
• Resin coated square clocks
• Modern office wall clocks

Compatibility

Works with: Quartz clock movements with a 12mm spindle, which suits the bare 3mm acrylic. The spindle is the threaded tube that carries the hands; it must pass through the board and still leave thread for the nut. If you layer anything on top, such as resin or a number ring, use an 18mm spindle.

Pairs well with: Clock hands made for a 12 inch clock, a clock dial, acrylic paints and epoxy resin.

Not suitable for: Long spindle movements on the bare board, as the spare thread sticks out past the nut and the hands sit far from the face.

Before You Buy

• Peel off the protective film before you paint or apply anything.
• The clock movement, hands and numbers are sold separately.
• Clean the surface before painting so the colour sticks well.

You may also like

• clock movements
• clock hands
• acrylic paints
• epoxy resin and hardener

Frequently Asked Questions

How big is this acrylic clock base?
It is 12 inch (about 30cm) square and 3mm thick, with a centre hole for the movement.

How is this different from the 10 inch round white acrylic base?
This one is square and 12 inch. The round base is 10 inch across. Both are white acrylic, 3mm thick, and take a 12mm spindle movement when left bare.