Unicorn Body Mosaic Art MDF Base | 12 Inch | 6.6mm Thick - DIY Mosaic Board

Turn loose mosaic tiles into a finished piece of wall decor without cutting a base yourself. This 12 inch unicorn body base is 6.6mm thick MDF with the design engraved into the surface, so the lines guide where each colour goes. Good for a nursery or a birthday gift.

Specifications

Creative Uses

• Tile the full surface for a piece of wall art
• Pastel tiles on the body and a glitter mix for the horn and tail
• Paint the base instead and use it as a plain cutout
• Use it as a template for a larger version on a wall

Compatibility

Works with: Glass mosaic tiles, ceramic tiles, mirror pieces, acrylic colours, craft adhesive and grout.

Pairs well with: Square glass mosaic tiles in this range, white grout and a strong craft adhesive.

Not suitable for: Outdoor or bathroom use, since raw MDF swells with moisture unless you seal it first. Not a chopping or serving surface.

How to Use

1. Wipe the base clean and seal it with a coat of primer or diluted white glue if you want extra protection.
2. Lay your tiles out dry inside the engraved lines first, so you can adjust before anything is fixed.
3. Glue the tiles down one section at a time and leave a small, even gap between them.
4. Let the adhesive cure fully before you grout.
5. Push grout into the gaps, wipe the tile faces clean with a damp cloth, and let it set.
6. Seal the back and the edges, then add a hook or a stand if you plan to hang it.

Before You Buy

• This is the bare MDF base only. Tiles, adhesive, grout and any hanging hardware are bought separately.
• The surface is raw unfinished MDF, so expect a natural wood tone and a light surface texture.
• The design is engraved as guide lines, not cut all the way through, so the base stays one solid piece.
• MDF is not water resistant unless you seal it, so keep the finished piece indoors.

You'll Need

• Mosaic Tiles
• Adhesives & Glue

You May Also Like

• Mosaic Art MDF
• MDF Boards & Bases
• Acrylic Colour Tubes

Frequently Asked Questions

What size is this mosaic base?

It measures 12 inch across at its widest point and is 6.6mm thick.

How is the 12 inch version different from the 8 inch one?

The design and the 6.6mm thickness are the same. Only the overall size changes, so the larger one takes more tiles and finishes as a bigger piece of wall art.

Which tiles work on this base?

Any of the glass mosaic tiles in this range. The 15 x 15 x 4 mm squares are the easiest to fit inside the engraved lines, and the triangles help where a curve leaves an awkward gap.

Do I have to grout it?

No. Grout fills the gaps and gives a finished look, but a tiled base left ungrouted still works as decor. If you skip grout, keep the gaps small and even.