Gold Acrylic Alphabet A to Z | 1 Inch | 1.5mm Thick - Set of 26 Letters

Spell out a name, a date or a word in clean gold letters without cutting or printing anything yourself. This set holds all 26 letters from A to Z in gold acrylic, each 1 inch tall and 1.5 mm thick, flat enough to sit under resin or glue down on a board and solid enough to handle without bending.

Specifications

Ideal For

• Name plaques, door signs and nursery lettering
• Resin artists setting letters into coasters, trays and keychains
• Wedding and event stationery, table names and signage
• Scrapbookers and journallers who want a raised metallic letter

Perfect for

• Spell a name or date across a resin coaster, tray or keychain
• Mount letters on wood or MDF for a door sign or name plaque
• Add a monogram to a journal cover, box lid or photo frame
• Lay out table names and seating signs for a wedding or party
• Build a nursery name banner or a shelf display

Compatibility

Works with: craft glue, epoxy adhesive and double sided tape for mounting onto wood, MDF, acrylic and card.

Pairs well with: MDF and wooden bases, keychain blanks and epoxy resin for embedded lettering.

Not suitable for: surfaces that flex, load bearing use, or cutting and reshaping. At 1.5 mm these are thin flat letters, not solid blocks that stand on their own.

How to Use

1. Lay the letters out and dry fit the word before any glue goes down.
2. Mark the baseline lightly so the letters sit level.
3. Apply a small dot of glue to the back of each letter rather than a full coat.
4. Press each letter into place and leave it to set undisturbed.
5. If you are embedding in resin, place the letters face down in the mould first, then pour.

Before You Buy

• Letters are supplied loose with no adhesive backing.
• 1 inch is the letter height. Width varies naturally from letter to letter, so an I is narrower than a W.
• The set holds one of each letter. Repeated letters in a word or name will need a second set.
• Gold shade may read slightly different on screen from the letters in hand.

You will Need

• craft glue
• instant and super glue

You may also like

• acrylic numbers
• keyrings and keychain blanks
• epoxy resin and hardener

Frequently Asked Questions

How many letters come in the set and how tall are they?
26 letters, A to Z, one of each. Every letter stands 1 inch tall, which is about 2.5 cm.

How is this different from the wooden and MDF alphabet sets?
These are gold acrylic at 1.5 mm thick, so they read as a smooth metallic letter straight out of the pack. MDF letters are thicker, matte and made to be painted first.

Can I set these into resin?
Yes, they are commonly used that way. Place them face down in the mould before pouring so the front finishes flush and flat.

Do they stick on their own?
No. There is no adhesive backing. Use craft glue, epoxy adhesive or double sided tape.

Will one set spell any name?
Only if no letter repeats. A name like ANNA needs two sets because it uses A and N twice.