Clock Face Marking Stencil | 8 Inch | Pack of 1 - Mark Hour Positions

Place every hour number evenly on your clock face without measuring angles. This 8 inch white plastic stencil has 12 spokes with tick marks and a centre point, so you can mark the hour positions and the exact centre in one go. Lay it on your MDF, resin or Lippan clock base, mark through the cutouts, and glue your numbers on the marks.

Specifications

Perfect for

• Marking hour positions on small MDF and resin clocks
• Finding the centre hole on a clock base
• Spacing Lippan mirrors evenly around a dial
• Guide lines for dot mandala art

Compatibility

Works with: flat clock bases up to about 8 inch, marked with a pencil or fine marker through the cutouts.

Pairs well with: acrylic clock numbers or bar markers, an MDF clock base and a clock movement.

Not suitable for: clock faces larger than the stencil, where the spokes will not reach the edge.

Before You Buy

• This is a marking guide only. Numbers, base and movement are not included.

You may also like

• mdf clock bases
• clock movement machines
• lippan art materials
• pre marked mdf

Frequently Asked Questions

How do I use this stencil to place clock numbers?
Centre the 8 inch stencil on your clock face, mark the centre point and a dot on each of the 12 spokes at the same tick mark, then glue a number on each dot.

Should I get the 8 inch or the 12x12 inch stencil?
Both have the same spoke pattern. The 8 inch stencil suits smaller clocks, while the 12x12 inch stencil covers larger wall clocks up to about 12 inch.