Round MDF Clock Base | 12 Inch | 3.3mm Thick | Pack of 1 - Wall Clock

Build a wall clock you design yourself on this 12 inch round MDF base. The board is 3.3mm thick and light, with a small centre hole that takes an 18mm spindle movement.

Specifications

Perfect for

• Resin coated wall clocks
• Lippan mirror work clocks
• Acrylic pour and fluid art clocks
• Living room clocks you design yourself

Compatibility

Works with: quartz clock movements with an 18mm spindle, made for boards 3 to 7mm thick. A 12mm spindle suits boards up to 3mm only, so it is too short for this board.

Pairs well with: clock hands made for a 12 inch clock, a clock number ring and acrylic paints.

Not suitable for: 12mm spindle movements, or damp spots near a sink unless the MDF is sealed.

Before You Buy

• The same photo is used for every size and thickness of this base, so go by the size and thickness in the title.
• The movement, hands and numbers are sold separately.
• The centre hole is small. If the shaft of your movement does not pass through, widen the hole slightly with a drill.
• Near twin: the 12 inch 6mm board is thicker and stiffer for heavy resin or clay.

You may also like

• clock movements
• clock hands
• clock number rings
• lippan art materials

Frequently Asked Questions

Which clock movement fits this 3.3mm base?
A movement with an 18mm spindle, made for 3 to 7mm boards, fits this 12 inch, 3.3mm board. A 12mm spindle is too short.

Should I pick the 3.3mm or the 6mm board in 12 inch?
Both take an 18mm spindle movement. The 3.3mm board is lighter and leaves more thread for the nut; the 6mm board is stiffer and holds heavy resin or clay better.