Tiered Stand Plate Mould | 3 Pcs | Round | Pack of 1 - Resin & Concrete

Cast three round plates of graded sizes for a tiered cupcake or trinket stand with this cupcake stand plate mould. It has 3 round plate moulds in flexible white silicone and works with epoxy resin and concrete. The pack calls it a round trinket tray.

Specifications

Perfect for

• Three tier cupcake style display stands
• Jewellery display towers
• Tiered trinket trays
• Wedding and party table decor
• Small business product displays

Compatibility

Works with: epoxy resin and concrete.

Pairs well with: mica powder, alcohol ink, gold flakes and pressed flowers.

Not suitable for: UV resin in one thick pour, as UV light cures only thin layers.

How to Use

1. Wash the mould with mild soap and water, dry it fully and set it on a flat, level surface.
2. Mix epoxy resin and hardener in the ratio your resin maker gives, or mix concrete to a smooth, pourable paste.
3. Add pigment, mica or inclusions if you like, then pour slowly into the deepest part first and let it level out.
4. Pop surface bubbles, cover against dust and leave it for the full cure or setting time your maker states.
5. Flex the silicone away from each edge and ease the piece out without pulling on thin parts.

Before You Buy

• Resin, pigments and tools are sold separately.
• We state no food grade rating for this mould, so use it for resin, concrete and craft work rather than for food.
• The maker advises keeping the mould away from sharp objects and open flame, and washing it with mild soap and water before first use.
• The centre rod and fittings shown in the photo are not part of this mould.
• The maker does not state a size for this mould, so please check the photos for scale.

You will Need

• epoxy resin and hardener
• resin mixing tools

You may also like

• resin tray moulds
• opaque resin pigments
• alcohol ink

Frequently Asked Questions

How many plates does the cupcake stand mould make?
It has 3 round plate moulds of graded sizes; the maker states no size, so please check the photos for scale.

Is the stand rod included?
No. The photo marks the stick as not included, so buy a tiered stand fitting separately.

Can I colour the resin or add flowers to the plates?
Yes. Mica powder, alcohol ink and opaque pigments mix into epoxy resin, and dried or pressed flowers sit well in a thin first layer before you top it up.

Can I use concrete in this mould as well as resin?
Yes. Mix the concrete to a smooth, pourable paste, tap out air bubbles and let it set fully before you flex the mould. Pick epoxy resin for a glossy, coloured piece and concrete for a matte, stone look.